QCM-50
Full-automatic extrusion blow moulding machine
Basic installation including
●Die head:center-feed die head
●Extrusion system: adopt world-famous brand automatic temperature controlling device. Drive the screw with electromagnetism motor reducer to realize stepless regulating.
●Clamping device: Adopt bi-directional synchronous clamping device with double axis single cylinder to stabilize equipment well
●Blowing device: with upper blowing type
●Hydraulic system: the whole hydraulic system adopts world-famous brand controlling components and proportional controlling circle.
●Electric controlling system: Adopt programmable controller made in SEIMENS, Japan. Even electric component is of world-famous brand.
| Technical parameters: (QCM-50 ) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Basic Parameters | suitable material | PE,PP,PVC,PS,PETG,so on | ||||||||
| max volume | 0.5L | |||||||||
| Die head number | 1 . 2 . 3 . 4 | |||||||||
| Size | 2.4×1.78×2.0(M) | |||||||||
| weight | 3.0T | |||||||||
| Total power | 24kws | |||||||||
| station | 2 | |||||||||
| System | specification | parameters | Note | |||||||
| Extrusion System | Summarize | High efficient low power consumption plasticizion system, transducer control, self-protect function when started at low temperature | ||||||||
| reducer | Hard finishing, high intension, low noise reducer | |||||||||
| screw | ∮45mm,L/D ratio 24-25,38CrMoALA with nitriding surface HV≥800, brittleness≤2; | Cooling system available | ||||||||
| Plasticization | 40Kg/H | HDPE | ||||||||
| Screw Heating zone | 3 Aluminum heater | Automatic heating | ||||||||
| Screw Heating power | 5Kg/H | |||||||||
| extrusion Motor | three phase asynchronous motor(380V,50HZ)75HP | |||||||||
| Cooling Fan power | 3.5kws | Automatic cooling | ||||||||
| Die System | Summarize | high-grade alloy steel,center feeding | ||||||||
| Max die mouth | ∮60mm | |||||||||
| Die Heating zone | 2 Stainless steel heating cycle | |||||||||
| Die Heating power | 2.4KW | |||||||||
| Clamping System | Summarize | High intension,rigidity,center mold locking,stable mould opening and clamping system | ||||||||
| Clamping force | 30KN | |||||||||
| Template distance | 400-1100mm | |||||||||
| Template stroke | 400-1101mm | |||||||||
| Max mould size | W*H: 7000×1000mm | |||||||||
| Mould material | High grade 50 ﹟steel | |||||||||
| Electric System | ||||||||||
| Summarize | PLC+touch screen(man-machine interface) standard extrusion blow molding machine controlling system (AUTO monitoring, fault alarm, auto counting, auxiliary function available) |
Germany SEIMENS PLC system | ||||||||
| Operate interface | 10 inch colorful touch screen, automatic self-diagnose alarm system | |||||||||
| Temperature control | Automatic temperature control module Temperature controlling precision: Various in ±1%; |
|||||||||
| Movement control | SEIMENS, Chinese/English Version | |||||||||
| Electric protection | Ampere overload, electric short circuit self-portection function | |||||||||
| Hydraulic System | Summarize | Multipel function hydraulic integrated block proportional control, high eficient | ||||||||
| Oil pump motor | three phase asynchronous motor(380V/220V, 50/60HZ)12KW | |||||||||
| Oil pump | Japanese double Vane pump | |||||||||
| Valves | YUKEN valves and connections | |||||||||
| Oil pipes | double layer overpressure resistant | |||||||||
| system pressure | 60Kg/cm² | |||||||||
| cooling system | separate water cooling cycle, oil cooler cooling system | |||||||||
| Pneumatic System | Summarize | FESTO an airtac pneumatic system | ||||||||
| Air pressure | 0.6Mpa | |||||||||
| Air displacement | M3/min | |||||||||
| Electromagnetic valve | FESTO | |||||||||
| Cooling System | Summarize | Sparate cooling system of mould, barrel and oil system | ||||||||
| Cooling medium | Water | |||||||||
| Water flow | 40L/min | |||||||||
| Water pressure | 0.3-0.6Mpa | |||||||||
| CONFIGURATION LIST | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Name | Trader | |||||||||
| Micro computer control system | SEIMENS | |||||||||
| temperatuer controller | Schneider from france | |||||||||
| Auxiliary relay | OMRON | |||||||||
| contactor | Schneider from france | |||||||||
| Electric motor | CHINA | |||||||||
| power source | CHINA | |||||||||
| transduer | EURA | |||||||||
| Hydraulic Parts | ||||||||||
| Name | Trader | |||||||||
| Oil pump | HIGH-TECH | |||||||||
| Valve | YUKEN | |||||||||
| Oil pump and connection | YUKEN | |||||||||
| Sealed part | CHINA | |||||||||
| Air Control System | ||||||||||
| Name | Trader | |||||||||
| Cylinder | FESTO | |||||||||
| Air Valve | FESTO | |||||||||
REMARK
1.)German SEIMENS human-machine interface,easy to control, and the aduanced inverter.
2.)flow and pressure proportional control by Japan YUKEN; Adoting European clamping system,double tructure mold parts. 3.)Impoted electronic parts,German SEIMENS welf-functioned and PLC control system.
4.)The range of this quotation list doesn’t include the following items: Wiring, tubing and the material not included in the machine; Material, lubricating oil and hydraulic oil for test run; Transportation costs and insurance.
5. INSTALLATION AND TEST
The buyer should place the machine to the right position and inform the supplier after the machine reach the buyer’s factory. We will send one engineers to test the machine until it running in normal state. The buyer bears expenses on accommodation, hotel, ticket and medical insurance. you will have to pay $50 per day for the extra days of his stay.
6. VALIDITY
The offer is valid for any order placed within a period of 30 days. Unless otherwise stated all conditions and terms are based on this list.
The offer is offered for the buyer’s need in selecting and not act as the enclosure of contract. The contract is the only standard.
NOTE: The price of mould is up to the product sample or blueprint.
| Related Products: | ||
|
Previous：
Next：
Tel
E-mail