Full Automatic Extrusion Blow Moulding Machine(Double Station)

The QCM hydraulic blow moulding machines. A wide variety of materials can be used for the machine, which are suitable for producing multi-type products in small batches. The clamping system is a high-precision single-station linear guide, extrusion system using a hard gear reducer and inverter imported from Japan.The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.

Famous Features
They are especially suitable for mass production of bottles for detergents, household chemicals and beverages, and more. For example, the production capacity of the 1L detergent bottle can be 30,000 pieces/day; 2L bottles 25,000 pcs/day; and 3L bottles 20,000pcs/day.

Different System
1.Clamping system: Single station+Hight-precision guide+large arm cylinder axle
2.Extrusion system: Hard gear surface reducer+Japan inverter
3.Die system: Central-incoming extrusion die with special steel
4.Hydraulic system: Japan hydraulic valve seal and proportional control
5.Control system: Japan PLC+Imported HMI+PLC automatic .

Parametric Technology

Number of die Set 1
MAX container capacity L 25
Machine Dimension(LxWxH) m 5.6x5.3x4.4
Total weight Ton 16
Clamping force KN 200
Platen opening stork mm 4000~1000
Platen size(WxH) mm 550x630
Mould thickness mm 4000~550
Screw diameter mm 100
Screw L/ D ratio L/D 24
Plasticising capacity(HDPE) kg/h 230
Number of heating zone zone 4
Screw heating power Kw 16
Power of screw-bar machine Kw 0.68
Extruder driving power Kw 75
Number of heating zone zone 3
Power of die heaing Kw 14.7
Max die-pin diameter mm 300
General power of machine Kw 140
Power of the electric motor of oil pump Kw 30
Average energy consumption Kw 100
Air pressure Mpa 1
Operating pressure,(hydraulic) Mpa 120~16

Related Products: